Glasscoater

The single-head roller coater machine allows application of a uniform, even layer of paint with a working width of 1300 and 1800 mm. It is possible to apply high quality paints for the spandrel effect, granting absence of paint on the glass sheet edges, or achieving semi transparent effects such as etched or sand blasted.

Multicoater

It has become quite common to use different application techniques rather traditional ones, due to a growing need of applying various coating layers, along with different types of coatings (i.e. silicon based coatings). The double head roller coater allows to apply coatings having different chemical characteristics. Working width 1800, 2300, 2600 and 3300 mm.

Solarcoater

The machine has been developed to allow the coating with liquids and surface protective treatments that should be applied in very low quantity, measurable only in nanometers. The ideal use of this machine is in the ARC (anti reflective coating) application over glass usable in the industry of PV panels for solar energy.

Framecoater

The special roller application system allows to coat the float glass sheets like a frame, while the special conveying bench grants precision and makes easier the handling even when working on big dimensions glass sheets. One operator feeds the machine by activating the automatic cycle, thus allowing the frame coating and the automatic recovery of the glass sheet, ensuring the coating of other frames.

Tanıtım Videosu

Decoflow

The best solution for high production lines is the curtain coater, which allows the application of big layer of paint at high speed. Ideal for mirror production lines, as well as for application of organic coatings this type of machine allows enhanced production due to a coating speed of over 60 mt/min.

Glassprint

The machines of Glassprint range represent the highest technological level of the traditional silk-screen printing machine with silk frame. The functioning is either semiautomatic (with manual load and unload of glass sheets) or fully automatic. The printing head is realized by using precise mechanisms, totally reliable and easy to use.

Prima Glass

Without question is the most flexible system, since all types of paint can be sprayed. Especially advised to whom switch from manual coating to automatic coating, easy to use, reliable, low operating and investment cost. Very fast color change, for small productive batches.

Mito Glass

Evolved spraying system, scan the size of the glass sheets and economize automatically the painting area. Reduces the uncontrolled waste of paint, granting an high transfer efficiency. It allows the use of several spraying equipment and optimizes the spraying effect, ensuring the absence of dust on the surface.

Flash-Off

The drying of organic paints or paints that contain a high percentage of volatile components, requires a first stage of evaporation. This operation is only achievable through hot air laminar ventilation, whose temperature depends on the paint characteristics.

Glassoven EL

The high temperature EL ovens can dry ceramic enamels (or other paint types) in preparation for the subsequent cooking process inside the tempering furnace. The action of infrared radiation, obtained by electrically operating lamps, works in combination with the hot air ventilation and recirculation system. The special support and diffuser of infrared rays, is allowing the forced air heating without further waste of energy.

Glassoven

The high temperature CAT ovens can dry ceramic enamels (or other paint types) in preparation for the subsequent cooking process inside the tempering furnace. The infrared radiation is given by special catalytic burners, flameless, activated with natural gas (methane) or LPG. Each catalytic plate is capable of emitting simultaneously rays and hot air, with considerable energy savings.

Glasscool

In order to allow handling of the glass sheet after drying, the oven must be followed by a cooling tunnel. The forced air ambient ventilation, through air blades both upper and lower side, permits a gradual cooling, without critical stresses within the glass.

Handling

The systems can run with high level of productivity or high flexibility. In order to satisfy these requirements it is often necessary to utilize mechanisms capable of reducing handling by the operators. Cefla Finishing offers its clients a long lasting history in the handling, carried out to complement the coating machines in order to offer the best productive functionality.

Spraying booths

It is possible to satisfy the need to coat occasional or small batches without renouncing quality. The system is extremely versatile due to its modularity which allows it to be perfectly positioned. The pressurization and the air control system guarantee the total absence of dust, thus allowing the highest surface quality.